访问 Cuckoo Electronics America - 官方网站

CUCKOO

User Manual

CP-ACR1620SW / CP-ACR1620SB

CP-ACR1620SW / CP-ACR1620SB User Manual

Dear users,

Thank you for choosing our FREESTANDING HOT AND COLD ICE MAKING WATER PURIFIER.

Save this user manual (including the warranty) for future use. You can find answers here if questions arise during usage or when certain features are not working.

Features and Advantages of Cuckoo FREESTANDING HOT AND COLD ICE MAKING WATER PURIFIER

The Benefits of Cuckoo

  • Reverse Osmosis Filtration system
    Clean water is provided by applying a reverse osmosis membrane.
  • Multi-functional and stylish ice-making water purifier
    Ice, cold water, hot water, and room temperature water are available with one single water purifier.
  • Clean ice
    Cuckoo's technological prowess produces clean ice with a stainless steel ice-making structure.
  • Ice storage UV cleaning system
    The ice storage UV cleaning system provides hygienic ice.
  • Electrolysis cleaning system
    The electrolysis cleaning system keeps the water purifier hygienic.
  • Button lock/function lock
    Added button and function locks help prevent accidents caused by children or the elderly.
  • Dual leak-prevention system
    Detects and blocks leaks that may occur during product use, ensuring safe use of the water purifier.
  • Fixed volume/non-stop dispensing function
    Conveniently dispenses cold, hot, and room temperature water at fixed volume, non-stop.

Safety Warnings

  • Heed the safety warnings to use the product safely and properly and prevent the occurrence of an accident or harmful situation.
  • The safety warnings include both warnings and cautions. Their definitions are as follows:
Safety Symbol Definitions
Symbol/LabelDefinition
WarningA potentially dangerous situation that may result in death or serious injury if not averted.
CautionA potentially dangerous situation that may result in minor injury if not averted.
Triangle Exclamation IconThis symbol is used to alert you to any subject that may be dangerous under certain circumstances. Carefully read the instructions and follow them when using the product to prevent danger.
ProhibitedThis symbol is used to prohibit certain actions.
InstructionsThis symbol is used to instruct the user to perform certain actions.

About the Power

Installation Information

During Use

Safety Precautions

During Use

Part Names

Front and back views of the freestanding ice-making water purifier. Front (left) — the operating panel fills the upper section, below it the dispensing area holds the Dispense Ice button on the left and the Dispense button on the right, with the drain dish along the bottom edge. Back (right) — the upper service panel with the power cord outlet at its lower right, and below it a full-height ventilation grille with the manual drainer on the left side and the inlet and auto drainer on the right side. — Operating panel, Dispense Ice button, Dispense button, Drain dish, Power cord, Manual drainer, Inlet, Auto drainer
  1. 1 Operating panel
  2. 2 Dispense Ice button
  3. 3 Dispense button
  4. 4 Drain dish
  5. 5 Power cord
  6. 6 Manual drainer
  7. 7 Inlet
  8. 8 Auto drainer

<Detailed description of the operating panel>

  • Energy Save button
  • Ice On/Off button
  • Volume button
  • Hot Water/Hot Water Lock button
  • Dispense Ice button
  • Night detection sensor
  • Cleaning button
  • Settings button
  • Cold Water button
  • Room Temperature Water/Button Lock button
  • Dispense button

Accessories Descriptions

  • User manual

  • Maintenance card

Water Purification Pipe Diagram/ Water Purification System

Water Purification System

  1. Step 1 Sediment 3.0 Filter
  2. Step 2 Pre Carbon Block 2.0 Filter
  3. Step 3 Reverse Osmosis Membrane Filter
  4. Step 4 Natural 3.0 Filter

4-step water filtration system

  • Through various filtration processes, it filters out invisible fine particles.

How to Install

  1. Install the tap water supply valve and close it.
  2. Connect the tap water supply hose to the tap water faucet (inlet), and the drainage hose to the drainage outlet.
    • Install the drainage hose within 5 m vertically and 20 m horizontally from the installation surface.
    • Fix the hose to prevent the water dispensed from the drainage hose from splashing.
  3. Turn the tap water supply valve to open.
  4. Plug in the power cord.
  5. Clean the filter using the Auto Filter Cleaning function.
    • During initial installation, the Auto Filter Cleaning function runs for 60 minutes.

Please Check Before Use

  1. Turn and open the tap water supply valve.
    • Open the tap water supply valve and check for leaks at hose connections.
      • Tap water supply valve, tap water (inlet), and drainage outlet of the product
  2. Take out the drain dish, loosen the two fixing screws of the lower cover, and separate the lower cover.
  3. Turn the ball valve counterclockwise to open it. Turn the manual drainage valve clockwise to close it.
  4. After connecting the power plug, check for leaks and malfunctions in the product and assemble the lower cover.
  5. Empty the drain dish regularly and perform routine filter replacements and maintenance.
    • Regular filter replacement and cleaning are crucial for clean drinking water.

How to Use

To Set Functions

Terminology

1Standby

A standby mode available for cold water, hot water, room temperature water, and ice dispensing. The front indicator lights up based on the selected function.

2User Settings mode

In Standby mode, press the [SETTING] button for 3 seconds to allow users to adjust the functions.

User Settings mode
Level 1Voice Volume Setting function
Level 2Current Time Setting function
Level 3Auto Cleaning Reservation Setting function
Level 4Cleaning Time Setting function
Level 5Auto Filter Cleaning function
Level 6Dispensing Method Setting function
Level 7Language Setting Function
3Fixed volume dispensing
  • Press the [Volume] button to adjust the dispensing volume. e.g. One cup → 1 liter → Non-stop → One cup → ··· (One cup by default)
  • Press the [Volume] button to select "One cup" and press the [Dispense] button to dispense about 250 cc.
  • Press the [Volume] button to select "1 L" and press the [Dispense] button to dispense about 1000 cc.
  • Press the [Volume] button to select "Non-stop" and press the [Dispense] button to dispense non-stop.
    • Room temperature water/cold water: About 4000 cc - Hot Water: About 2000 cc
4Manual dispensing

Press and hold the [Dispense] button for more than 1 second to switch to manual dispensing, and water is dispensed for as long as the [Dispense] button is pressed.

5Ice is dispensed for as long as the [Dispense Ice] button is pressed.

To Set the Cold Water Function

  1. If the Cold Water function is turned off, press and hold the [COLD] button for 3 seconds to turn the Cold Water function on.
    • The voice guide will say, "Selecting Cold water function." while pressing the [COLD] button.
    • When the Cold Water function is activated, the [COLD] indicator will light up, and the voice guide will say, "Cold water function selected."
  2. If you do not wish to use the cold water, deactivate the function by pressing and holding the [COLD] button for 3 seconds while the Cold Water function is activated.
    • The voice guide will say, "Canceling Cold water function." while pressing the [COLD] button.
    • When the Cold Water function is deactivated, the [COLD] indicator will turn off, and the voice guide will say, "Cold water function Cancelled."
    • If you press the [COLD] button while the cold water function is deactivated, the voice guide will say, "Press Cold button for 3 seconds to use the cold water function."

To Use Cold Water

  1. Press the [COLD] button to select cold water.
    • The voice guide will say, "Cold water."
  2. Dispensing a fixed volume
    • Press the [Volume] button to select the desired dispensing volume.
    • Press the [Dispense] button again. Cold water will be dispensed.
    • Dispensing will stop when the selected fixed volume is dispensed.
    • Pressing any button other than the [Dispense Ice] button will stop the dispensing process.
  3. Dispensing manually
    • Press the [Dispense] button. Cold water will be dispensed.
    • Press and hold the [Dispense] button for more than 1 second to switch to manual dispensing.
    • Dispensing will stop when you release the [Dispense] button during manual dispensing.

To Use Room Temperature Water

  1. Press the [ROOM/LOCK BUTTON] button to select room temperature water.
    • The voice guide will say, "Room temperature water."
  2. Dispensing a fixed volume
    • Press the [Volume] button to select the desired dispensing volume.
    • Press the [Dispense] button again. Room temperature water will be dispensed.
    • Dispensing will stop when the selected fixed volume is dispensed.
    • Pressing any button other than the [Dispense Ice] button will stop the dispensing process.
  3. Dispensing manually
    • Press the [Dispense] button. Room temperature water will be dispensed.
    • Press and hold the [Dispense] button for more than 1 second to switch to manual dispensing.
    • Dispensing will stop when you release the [Dispense] button during manual dispensing.

Setting the Hot Water Lock Function

This function is intended for safety purposes, preventing accidental control by children, etc., and protecting them from burns.

If this function is activated, the [HOT/LOCK(HOT)] button input will be blocked.

  1. If you press and hold the [HOT/LOCK(HOT)] button for about 3 seconds in Standby mode, the Hot Water Lock will be activated and the "Hot Water Lock" indicator will light up.
    • If the [HOT/LOCK(HOT)] button is pressed in Hot Water Lock, the voice guide will say, "Child lock on."
    • If you press and hold the [HOT/LOCK(HOT)] button for about 3 seconds in Hot Water Lock, the Hot Water Lock will be deactivated and the "LOCK (HOT)" indicator will turn off.

To Use Hot Water

  1. Press the [HOT/LOCK(HOT)] button to select hot water.
    • The voice guide will say, "Hot water."
  2. Dispensing a fixed volume
    • Press the [Volume] button to select the desired dispensing volume.
    • Press the [Dispense] button again. Hot water will be dispensed.
    • Dispensing will stop when the selected fixed volume is dispensed.
    • Pressing any button other than the [Dispense Ice] button will stop the dispensing process.
  3. Dispensing manually
    • Press the [Dispense] button and hot water will be dispensed.
    • Press and hold the [Dispense] button for more than 1 second to switch to manual dispensing.
    • Dispensing will stop when you release the [Dispense] button during manual dispensing.
  4. You can use the Hot Water function after the hot water tank is filled.

To Use the Ice Making Function

  1. You can use the function if the [Ice On/Off] button indicator is lit up.
    • ※ The Ice Making function is activated by default when using the product for the first time.
  2. If the [Ice On/Off] button indicator is turned off, press and hold the [Ice On/Off] button for 3 seconds.
    • The [Ice On/Off] indicator will light up and ice-making will start.
  3. If you do not wish to use the Ice Making function, press and hold the [Ice On/Off] button for 3 seconds.
    • The [Ice On/Off] button indicator will turn off, and the ice-making will stop.

To Use Ice

  1. Dispensing ice
    • Press the [Dispense Ice] button. Ice will be dispensed.
    • Dispensing will stop if you release the [Dispense Ice] button during dispensing.
  2. The Ice Full indicator will turn on/off based on the volume of ice.

To Use the Auto Cleaning Reservation Function

  1. You can turn the Auto Cleaning Reservation function on and off in the User Settings mode.
    • ※ The Auto Cleaning Reservation function is turned on by default when starting the product for the first time.
  2. You can deactivate the Auto Cleaning Reservation function by turning the function off in the User Settings mode.

To Use the Instant Auto Cleaning Function

This function allows users to initiate Auto Cleaning at their desired time, instead of using Auto Cleaning Reservation.
※ The Cleaning method and duration are the same as the Auto Cleaning Reservation function.

  1. Press and hold the [Cleaning] button for 3 seconds in Standby mode.
    • Instant Auto Cleaning starts immediately, and the voice guide will say, "Start Self cleaning."
    • The [Cleaning] button indicator will light up and the cleaning progress will display.
    • During cleaning, the "Electrolysis Cleaning" indicator will light up in blue-green.
  2. To cancel cleaning, press the [Cleaning] button during auto cleaning.
    • The voice guide will say, "Self cleaning Cancelled." and cleaning will stop.
    • When cleaning ends, the "Electrolysis Cleaning" indicator will light up in white.
    • In some cases, subsequent processes such as draining cleaning water, rinsing, and intake may follow. It will take some time to return to Standby mode and allow water dispensing.

To Use the Power Saving Function

This feature is used to save power by reducing the standby power and the brightness of indicators.

  1. Press the [Energy Save] button for 3 seconds while the [Energy Save] indicator is turned off.
    • The [Energy Save] button indicator will light up, and all indicators will dim after 2 seconds, with the indicators for unused functions turning off.
    • The voice guide will say, "Energy Eye function selected."
    • While the Power Saving function is activated, if the night detection sensor detects darkness for a certain period, all indicators, except the [ROOM/LOCK BUTTON] indicator, will turn off.
    • When a button is pressed during power-saving operation, the indicators will light up. (If there is no button input for a certain period of time, the indicators will turn off.)
  2. Press the [Energy Save] button while the [Energy Save] indicator is lit to deactivate the Power Saving function.
    • The [Energy Save] indicator will turn off, and all indicators will light up.
    • The voice guide will say, "Energy-Eye Function Cancelled."

To Use the Button Lock Function

This feature is used to prevent random control by children, etc., or to clean the product. If this feature is activated, the input of all the buttons will be disabled.

  1. If you press and hold the [ROOM/LOCK BUTTON] button for 3 seconds in Standby mode, the Button Lock will be activated and the 'Button Lock' indicator will light up.
    • When you press a button in the Button Lock state, the voice guide will say, "Buttons are currently locked."
    • Press and hold the [ROOM/LOCK BUTTON] button for 3 seconds while in Button Lock mode to deactivate the Button Lock function.

To Adjust the Volume of the Voice Guide

  1. Press and hold the [SETTING] button for 3 seconds in Standby mode.
    • You will enter User Settings mode.
  2. Press the [COLD] button once to enter Voice Volume Setting mode.
    • The voice guide will say, "Voice volume setting mode."
  3. Press the [SETTING] button and follow the voice guide to adjust the set value.
    • To set the maximum volume, select 5 as the setting value.
    • If you do not want to use the voice guide, select OFF2 as the setting value.
    • If you do not want to use the button sound and the voice guide, select OFF1 as the setting value.
  4. Select the desired voice volume and press the [SETTING] button to save.
    • The voice guide will say, "Set-up completed."

To Change the Current Time

  1. Press and hold the [SETTING] button for 3 seconds in Standby mode.
    • You will enter User Settings mode.
  2. Press the [COLD] button twice to enter the Current Time Setting mode.
    • The voice guide will say, "Present time setting mode.
  3. Press the [SETTING] button, and the voice guide will say, "Present time setting mode."
  4. Then, follow the voice guide and change the current time in the order of "hour" setting → "10-minute" setting → "1-minute" setting.
  5. After changing the current time, press the [SETTING] button to save.
    • The voice guide will say, "Set-up completed."

To Set the Auto Cleaning Reservation Function

  1. Press and hold the [SETTING] button for 3 seconds in Standby mode.
    • You will enter User Settings mode.
  2. Press the [COLD] button 3 times to enter Auto Cleaning Reservation Setting mode.
    • The voice guide will say, "Self-cleaning Timer mode."
  3. Press the [SETTING] button and follow the voice guide to adjust the set value.
  4. After setting/deactivating the Auto Cleaning Reservation function, press the [SETTING] button to save.
    • The voice guide will say, "Set-up completed."

To Change the Auto Cleaning Reservation time Function

  1. Press and hold the [SETTING] button for 3 seconds in Standby mode.
    • You will enter User Settings mode.
  2. Press the [COLD] button 4 times to enter Cleaning Reservation Time Setting mode.
    • The voice guide will say, "Self-cleaning Timer Setting mode." mode of the current time.
  3. Press the [SETTING] button and follow the voice guide to change the auto cleaning reservation time.
    • The cleaning time display is the same as the "hour" setting
  4. After changing the Auto Cleaning Reservation Time, press the [SETTING] button to save.
    • The voice guide will say, "Set-up completed."

To Use the Auto Filter Cleaning Function

  1. Press and hold the [SETTING] button for 3 seconds in Standby mode.
    • You will enter User Settings mode.
  2. Press the [COLD] button 5 times to enter Auto Filter Cleaning mode.
    • The voice guide will say, ""Automatic filter flushing function."
  3. Press the [SETTING] button to start auto filter cleaning.
    • The filter will be automatically cleaned, and the voice guide will say, "Start auto filter cleaning."
    • The progress indicator will show the filter cleaning progress.
    • When auto filter cleaning is complete, the voice guide will say, "Auto filter cleaning completed." and return to standby mode available for water dispensing.
  4. To cancel the Auto Filter Cleaning function, press the [SETTING] button during auto filter cleaning.

How To Set Language

  1. Press and hold the [SETTING] button for 3seconds in Standy mode.
    • You will enter User Setting mode.
  2. Press the [Cold Water] button 7 times to enter Language Setting mode .
    • The Voice Guide will say, "Voice selection mode."
  3. Press the [SETTING] button and follow the voice guide then adjust the set value.
    • Each time you press the [Cold Water]button, the language will change. e.g.) English → Korean → Spanish → …
  4. Select the desired language and save it by pressing the [Settings] button.
    • The Voice Guide will say "Set-up completed."

To Change the Dispensing Method

  1. Press and hold the [SETTING] button for 3 seconds in Standby mode.
    • You will enter User Settings mode.
  2. Press the [COLD] button 6 times to enter Dispensing Method Setting mode.
    • The voice guide will say, "Dispensing Method Setting mode".
  3. Press the [SETTING] button and follow the voice guide to adjust the set value.
    • ※ If manual dispensing is selected
    • Water is dispensed for as long as the [Dispense] button is pressed.
    • After selecting the dispensing volume using the [Volume] button, press the [Dispense] button to dispense a fixed volume of water.
    • ※ If auto dispensing is selected
    • Press the [Dispense] button once to dispense a fixed volume of water.
    • Press and hold the [Dispense] button for more than 1 second to switch to manual dispensing.
  4. Select the desired dispensing method and press the [SETTING] button to save.
    • The voice guide will say, "Set-up completed".

How to Clean

How to Clean the Main Body of the Product

  • Wipe with a soft, dry cloth.
    • Before wiping, activate the Button Lock function to prevent malfunction during cleaning.
    • If heavily contaminated, wipe the product with a slightly damp cloth. (Do not use benzene, thinner, or an agent containing abrasives for cleaning.)

How to Drain and Clean the Drain Dish

  1. Separating the drain dish
    • Hold the drain dish and pull it forward gently to separate the drain dish.
    • ※ The water inside may overflow if you forcefully pull the drain dish while separating it from the product.
  2. Separating the drain dish grille
    • After separating the drain dish, hold the grille holes on the top of the drain dish and separate the drain dish grille.
  3. Cleaning the drain dish
    • Discard any stagnated water, and remove any remaining moisture using a dry cloth, etc.
  4. Assembling the drain dish
    • After cleaning the drain dish, reassemble them in the reverse order of disassembly.

How to Clean Ice Dispenser and Water Dispenser

  1. Separate the dispensing guide at the front of the product.
  2. Rinse the separated dispensing guide with water and wipe it with a cloth.
  3. Wipe the ice dispenser and water dispenser with a clean cloth.
  4. Attach the dispensing guide to the product.
  5. After attaching it, check if the dispenser protrudes outward from the dispensing packing.

How to Clean the Ice Storage

  1. Close the tap water supply valve.
  2. Press the [Dispense Ice] button to dispense all the ice in the ice tank.
  3. Pull out the power plug.
  4. Loosen the two fixing screws on the back of the upper cover, then push and remove the upper cover.
  5. Open the cover of the ice storage.
    • ※ Eye damage may result from directly viewing the light produced by uv lamp in this apparatus. Always turn off lamp before opening ice storage cover.
  6. Separate the ice-making tray and paddle, then rinse them with clean water. Wipe the separated parts with a clean cloth, etc. before attaching them.
    • There is a risk of damage if you forcibly separate the parts. When disassembling, push to the direction of the indicating arrow.
  7. To clean the inside of the ice storage, use a soft brush or cloth to wipe its inner surface.
  8. After attaching the parts, reassemble them in the reverse order of disassembly.
    • After cleaning the parts, check that they are properly attached. (Failure to attach them may cause product failure.)
  9. Open the tap water supply valve.
  10. Connect the power plug on the back of the product.

How to Replace Filters

How to Replace Filters (Be sure to use official Cuckoo filters.)

  1. Close the tap water supply valve.
  2. Take out the drain dish, loosen the fixing screws (2 units) of the lower cover and separate the lower cover.
  3. Loosen the filter bracket fixing screw (1 unit).
  4. Turn the filter lever clockwise to separate the filter bracket.
    • If the filter bracket fixing screw is fastened, the filter bracket cannot be separated.
    • If the filter lever is not in the close position, the filter bracket cannot be separated.
  5. Lift the filter and pull it down to separate and replace it.
    • The order of filters starts from the left, starting with #1.
    • Filter #1: Sediment 3.0 filter
    • Filter #2: Pre-carbon block 2.0 filter
    • Filter #3: Reverse osmosis filter
    • Filter #4: Natural 3.0 filter
  1. After attaching the filter bracket, turn the filter lever counterclockwise.
    • If the filter lever is not in the Open position, tap water will not be supplied.
    • ※ Please be sure to assemble the filter bracket.
  2. Fasten the filter bracket fixing screw (1 unit).
  3. After assembling the lower cover in the direction of the arrow, fasten the fixing screws (2 units) of the lower cover and assemble the drain dish.
  4. Open the tap water supply valve.

Filter Replacement Cycle/ Recommendations/Filter Layout Diagram

Filter Replacement Cycle

The filter replacement cycle is set based on a daily household usage of 10 L the cycle may be affected by tap water quality.

Filter nameEstimated replacement cycle
Sediment 3.0 Filter1,800L / 6months
Pre Carbon Block 2.0 Filter1,800L / 6months
Reverse Osmosis Membrane Filter3,600L / 12months
Natural 3.0 Filter3,600L / 12months

Recommendations

Effective purification capacity

It refers to the minimum treatment capacity where contaminants are effectively removed without cleaning, regenerating, or replacing the filter inside the water purifier.

Filter replacement cycle

The filter replacement cycle indicates the expected lifespan during which the filter is anticipated to perform optimally. This duration is determined through a meticulous examination of the filters.

The cycle is calculated based on a daily usage of approximately 10 L (serving drinking water for 4 people) sourced from tap water. If the usage is higher, the replacement cycle may be shorter.

As for reverse osmosis filters, the filtered output is 20% to 40% of the incoming tap water (based on a water temperature of 25°C and tap water pressure of 0.34 MPa). This may vary depending on tap water temperature and pressure.

Check before Asking for Support

▼ If the product is not used according to the manual, it may not operate properly, even if there is no malfunction. If you experience any malfunction, check your product as described below. If the problem persists, please contact the customer service center.

IssueVerifyAction
The water tastes or smells unpleasant.• Has the water purifier been left unused for a long time?• Empty the ice from the ice storage using the [Dispense Ice] button, and immediately start auto cleaning.
• Is it time to change the filter?• Request filter replacement through the customer service center.
Water is not being dispensed.• Is it plugged into the outlet?• Plug in the power cord.
• Is tap water supplied smoothly?• Open the tap water supply valve.
• Check if the water supply hose is not bent.
• Check if the water supply has been cut off.
• Did you press the [Dispense] button properly?• Press the [Dispense] button properly.
• Is there any water pooling underneath the product?• Close the tap water valve, remove the power plug, and then contact the customer service center.
• Is it time to change the filter?• Request filter replacement through the customer service center.
Cold water/ice is not being dispensed.• Is the Ice Making function active?• Activate the Ice Making function.
• Did you press the [Dispense Ice] button properly?• Press the [Dispense Ice] button properly.
• Have you dispensed a large volume of cold water?• After dispensing a large volume of cold water, the product takes time to cool down.
• After dispensing a large volume of cold water, ice-making may be delayed.
• Did you close the tap water supply valve?• Check the tap water supply valve.
• Is the back of the product well-ventilated?• Check if the heat sink at the back of the product is blocked and remove any obstacles.
• Move the product to a well-ventilated location. (When relocating the product, contact our customer service center.)
The buttons won't respond.• Is the Button Lock active?• Cancel the Button Lock function. (Use your thumb so that the area of contact with the button is wider.)

▼ If the product is not used according to the manual, it may not operate properly, even if there is no malfunction. If you experience any malfunction, check your product as described below. If the problem persists, please contact the customer service center.

IssueVerifyAction
Hot water is lukewarm.• Is it your first cup of hot water?• The temperature of the first cup may be low when operating hot water for the first time.
• Check if the water is dispensed at normal temperature from the second cup.
The purified water volume suddenly decreased.• Did you close the tap water supply valve?• Open the tap water supply valve.
• Has the filter replacement cycle passed?• Replace the filter with an official Cuckoo filter.
The product makes excessive noise.• Is the surface where the product is installed flat?• Install the product on a flat and sturdy surface.
• Is it in contact with other objects?• Be sure to keep a certain distance between the product and other objects.
• Is the drain dish properly assembled?• If the drain dish is not properly attached, the product may generate abnormal noise. Check the assembly status of the drain dish.
• Is the Ice Making function in operation?• During ice-making, there may be noises such as rattling or flowing sound. The duration of noises may differ depending on the frequency of product usage.
• There may be noise from falling ice during ice removal, which is normal.
Foreign substances are coming out of the water.• Has the filter replacement cycle passed?• Replace the filter with an official Cuckoo filter.
• Empty the ice from the ice storage using the [Dispense Ice] button, and immediately start auto cleaning.
Water is leaking from the water purifier.• Is there a defect in the area of assembly (connection)?• Lock the tap water supply valve, unplug the cord of the water purifier, and request for services.
• Is the house or outdoor environment humid?• Condensation may occur when the cold air inside the water purifier comes into contact with humidity. This phenomenon is similar to water droplets forming on a glass cup.

Product Specifications

Product Specifications Table
Product NameICE WATER FILTRATION DEVICE
Model NameCP-ACR1620SW(White), CP-ACR1620SB(Black)
Rated VoltageSingle-Phase AC 120V/60Hz
Power/Current Consumption705W(5.9A) [Cold water: 190W(1.6 A), hot water: 465W(3.9A), ice making: 240W(2A)]
FiltrationReverse Osmosis Filtration System
FilterCategorySediment 3.0 Filter | Pre Carbon Block 2.0 Filter | Reverse Osmosis Membrane Filter | Natural 3.0 Filter
CapacityRoom temperature water4.0 L
Hot Water4.0 L
Cold Water6.0 L
IceAround 8.8lb (4.0 kg)
Refrigerant typeR-134a
Climate ClassN (temperate zone)
ProductWeight53kg
Size (W X D X H)16.54" x 21.26" x 57.09" / 420 mm X 540 mm X 1450 mm
Used Tap Water Pressure0.28~0.7MPa(2.8~7.0bar)
Used Environment Temperature5~40°C (41~104°F)
Used Tap Water Temperature5-35°C (41~95°F)

※ Details indicated in this user manual (exterior, design, and specifications) may change without notice for quality improvement.

※ This device has undergone conformity assessment for use in business settings. If used in residential settings, it may cause radio wave interference.

※ The water purifier quality test is limited to the performance of water purifiers according to the "Designated Notice on Criteria, Specifications and Inspection Agencies for Water Purifiers." For additional functions subject to other laws, additional certification and permits are required under the said laws.

※ The displayed ice volume represents the amount of ice evenly filled up to the detection sensor inside the ice tank. The actual ice volume may vary depending on the environmental conditions and how ice accumulates within the ice tank.

※ Manufacturer: Cuckoo HomeSys Co., Ltd.

https://cuckoorental.com

https://cuckooamerica.com

888.700.0425

We provide satisfying consultation and services concerning your complaints, suggestions, and recommendations upon receiving your troubled product model name, status, and contact information.

  • After reading this manual, keep it in a place easily accessible to the user for future reference.
  • This manual includes the warranty.
  • Caution : Please read this manual carefully to ensure safety and a longer product lifespan.
Document Number
10383-0033C0 Rev.0
© CUCKOO · CP-ACR1620SW / CP-ACR1620SB · English User Manual

客户服务

店铺位置

常问题问

Klarna

0% APR
© 2026 Cuckoo Rental. 
  • American Express
  • Diners Club
  • Discover
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa